HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit – 865414-B21

• Titanium (96%) power efficiency certification from 80Plus program – one of the highest power efficiency certifications available in the IT industry
• Reduces data center operating costs related to power by reducing server power requirements and power waste

Flex Slot Design

• Tool-less hot plug design improves serviceability by allowing quick and easy access to system power supplies
• Common form factor across all ProLiant Gen9 and Gen10servers allows multiple server platforms to share power supply spares, reducing cost and space requirements for spares

Wide arrange of Power Output Options

• Multiple output options allowing users to “right-size” their power needs and avoid “trapped” power capacity in their data centers caused by over-subscribing power needs
• Support for both low-line and high-line AC input voltages providing additional flexibility to operate in multiple IT environments. -48VDC, 277VAC and 380VDC input voltages are also available.

Power Management

• Supports multiple operating modes to maximize power efficiency when configuring servers with redundant power supplies
• Integrated support for HPE’s Power Discovery Services which communicates with the intelligent PDU to monitor and manage power usage (Gen9 1400W Platinum Plus only)

The 80PLUS test protocol was developed jointly by Ecova Plug Load Solutions and the Electric Power Research Institute (EPRI) in 2003, with the program being formally launched in 2004.

The 80 PLUS performance specification requires power supplies in servers to be 80% or greater energy efficient at 20%, 50% and 100% of rated load with a true power factor of 0.9 or greater. This makes an 80 PLUS certified power supply substantially more efficient than typical power supplies found in many other electrical devices.

Who benefits from the 80PLUS power supply program?

• Commercial/Residential Consumers – empowered with information regarding energy efficient IT options that help them cut energy costs and reduce their environmental impact
• Utility/Power Providers – participation in a program that focuses on reducing power demands on overburdened grids as well as reducing power waste and its associated environmental impact

What are the efficiency requirements for each certification level?

What level of certification do HPE Flexible Slot Power Supplies meet?
HPE’s Platinum and Platinum Plus power supply options meet 80PLUS requirements for Platinum certification. HPE’s Titanium and Titanium Plus power supply options meet 80PLUS requirements for Titanium certification. To review 80Plus certification reports for each HPE Flexible Slot Power Supply, please refer to the 80Plus website at: https://www.plugloadsolutions.com/.

Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA), the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output and 96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements.

HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy requests with the current power supplies by the set deadline.

An HPE ProLiant server solution configured with 2 identical Flex Slot Power Supplies – 500W, 800W, 1400W, 1600W, or 1800W-2200W – supports the following three power scenarios:

• Operation with a single power supply
• Operation with redundant power supplies in load-balanced mode
• Operation with redundant power supplies in high-efficiency mode

A single Flex Slot Power Supply supporting the entire load of the server can achieve the highest efficiency when operating in the middle range (50%) of its capacity.

For redundant Flex Slot Power Supplies operating in load-balanced mode (the default mode when adding redundant power supplies), the load is shared equally between the two power supplies. In general, the load-balanced mode offers better efficiency for loads requiring more than 60 percent of the primary power supply capacity.

When high-efficiency mode is enabled for redundant supplies (via the server’s ROM-based setup utility under System options -> Redundancy options), each power supply in the server is designated as either a primary or secondary supply, and the entire server load is shifted to the primary power supply. This allows the primary power supply to operate at higher efficiency points on the load curve while the secondary power supply operates in idle mode, providing no output power and consuming very little energy (typically two to four watts per supply). The user can also specify that odd or even power supplies will be designated manually or automatically as secondary supplies. This flexibility allows users to balance the load across a rack manually or automatically.

HPE Gen10 Flex Slot Low Halogen power supplies are compatible with most HPE ProLiant servers including the:

· HPE ProLiant DL20 Gen10 and Gen10 Plus

· HPE ProLiant DL320 Gen11

· HPE ProLiant DL325 Gen10, Gen10 Plus, Gen10 Plus v2 and Gen11

· HPE ProLiant DL345 Gen10 Plus and Gen11

· HPE ProLiant DL360 Gen10, Gen10 Plus and Gen11

· HPE ProLiant DL365 Gen10 Plus and Gen11

· HPE ProLiant DL380 Gen10, Gen10 Plus and Gen11

· HPE ProLiant DL385 Gen10, Gen10 Plus, Gen10 Plus v2 and Gen11

· HPE ProLiant DL560 Gen10

· HPE ProLiant DL580 Gen10

· HPE ProLiant ML30 Gen10 and Gen10 Plus

· HPE ProLiant ML110 Gen10

· HPE ProLiant ML350 Gen10 and Gen11

· HPE ProLiant RL300 Gen11

· HPE Alletra 4110

· HPE Alletra 4120

· HPE Apollo 2000 Gen10 and Gen10 Plus

· HPE Apollo 4200 Gen10 and Gen10 Plus

· HPE Apollo 4500 Gen10

Notes:

– Gen11 servers as well as DL325 Gen10 Plus v2 and Gen11, DL345 Gen10 Plus and Gen11, DL360 Gen10 Plus, DL365 Gen10 Plus and Gen11, DL380 Gen10 Plus, DL385 Gen10 Plus v2 and Gen11, Apollo 2000 Gen10 Plus and Apollo 4200 Gen10 Plus must select P38995-B21 for 800W or P38997-B21 for 1600W power supplies.

– To check for power supply compatibility, please review the appropriate HPE Server