Overview C9200L-48T-4X-E
The C9200L-48T-4X-E is the Catalyst 4L 10x48G 9200-port data uplink switch with essential networking software. The Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With their pedigree family, the Catalyst 9200 Series switches offer simplicity without compromise: it’s safe, always on, and simplified.
Specification C9200L-48T-4X-E
Specification C9200L-48T-4X-E |
|
Full downlink 10/100/1000 or PoE + copper ports | Data from 48 ports |
Uplink configuration | 4x10G fixed toe caps |
Default primary power supply | PWR-C5-125WAC |
Ventilators | Redundant fixed |
Software | Network essentials |
Chassis dimensions | 1.73×17.5×11.3 inches
4.4×44.5×28.8 cm |
Virtual networks | 1 |
Stackable bandwidth | 80 Gbps |
Total number of MAC addresses | 16.000 |
Total number of IPv4 routes (ARP plus learned routes) | 11,000 (8,000 direct routes and 3,000 indirect routes) |
IPv4 Routing Entries | 3.000 |
IPv6 Routing Entries | 1.500 |
Multicast Routing Scale | 1.000 |
QoS scale inputs | 1.000 |
ACL scale inputs | 1.500 |
Buffer packet per SKU | 6 MB buffer for 24- or 48-port Gigabit Ethernet models. |
NetFlow Flexible (FNF) inputs | 16,000 streams in 24- and 48-port Gigabit Ethernet models |
DRAM | 2 GB |
Flash | 4 GB |
IDs VLAN | 1024 |
Total Switched Virtual Interfaces (SVIs) | 512 |
Jumbo mounts | 9198 bytes |
Wireless bandwidth per switch | N/A |
Switching capability | 176 Gbps |
Forwarding rate | 261.9 Mpps |
Mean time between failures (hours) | 503.400 |
Reviews
There are no reviews yet.